• Alkanatur replacement filter cartridge
1 5

Alkanatur Replacement Filter

Alkanatur Replacement Filter

$39.95 AUD
$39.95 AUD
Sale Sold out
Tax included. Shipping calculated at checkout.

Alkanatur Filter

The Alkanatur alkaline ionised water filter, manufactured 100% in Spain, is the result of 2 years of investigation with the University of Galicia. It has all the certifications required by the European Union.See Certificates.

The Alkamicronized selective® patent allows filtering up to 400 liters of water free of chlorine, fluorides, pesticides, nitrates, heavy metals, and excess calcium. This is possible thanks to coconut charcoal powder inside the filter.

It does not add sodium, and the filter DOES NOT contain ion exchange resin.

Our Alkamicronized selective patent, allows the filter to eliminate up to 400 liters of water Free of chlorine, fluorides, nitrates, heavy metals, excess of calcium, and much more.

Fast filtering: 1 liter in 4 minutes.

The filter has Antioxidant Alkaline Bioceramics and high-quality coconut active charcoal. Providing an alkaline pH (between 8.5 and 9.5) without adding calcium or sodium to the water, and adding high-quality magnesium.

The water filter provides a unique antioxidant capacity of -700mV ORP. Our patented CAM system (Capacity to Maintain Antioxidant) allows for 77.7% of the antioxidants to reach the areas in your body by free radicals. Most products only use 10% of the antioxidants generated effectively.

The filter is manufactured 100% with natural materials, that do not harm the body.

The result is fresh, natural, and delicious water.

Step-by-Step Instructions
  • Soak and Activate the Filter:
    • Fill the pitcher or a bowl halfway with tap water.
    • Submerge the filter for about 20 minutes (you can place the water tank on top of it so it does not float) to let it release internal air bubbles
  • Install the Filter in the Tank:
    • Remove the filter and empty the pitcher.
    • Place the filter tank on a stable, flat surface (do not push it in while it is inside the transparent jug, to avoid cracking it).
    • Insert the filter with the grill facing up and the small hole facing down, pressing it firmly into place until it sits flush at the bottom of the tank. 
  • Flush the First Cycles:
    • Place the assembled tank into the jug and fill it completely with tap water from the sink.
    • Let the water filter through completely and discard the first 2 to 3 full batches of water (you can use this initial flush water for your plants).
    • Note: The water may look slightly grayish or black during these first runs; this is completely normal and comes from the natural coconut active charcoal.
  • Assemble the Jug:
    • Put the reservoir and lid back onto the transparent pitcher.
    • Your jug is now ready, and you can start drinking the water from the 4th cycle onward for the best taste.

https://www.youtube.com/watch?v=2kZyONqF1Jk

 


View full details